
Dyno Testing and ECU Tuning on a Rolling Road
Dynomax 4WD chassis dynamometer in Riga, Latvia – accurate power and torque measurement, real-time ECU data logging, custom software calibration. Before/after graphs, certificate, all drivetrain types
Check availability for your vehicle
Enter plate number or select manually

Why you need this
Factory specs rarely match reality
Manufacturers quote power at the crankshaft under ideal conditions. Real wheel horsepower is always lower due to drivetrain losses, component wear, and environmental factors. A dyno run reveals the actual numbers your engine delivers right now.
Hidden power loss goes undetected on the road
Gradual engine degradation is nearly impossible to feel behind the wheel. A dyno measurement exposes losses you would otherwise miss – before they escalate into expensive mechanical failures.
Verify chip tuning results with hard data
The feeling of 'noticeably faster' is not a metric. A before-and-after dyno test on the same rolling road under identical conditions shows the exact horsepower and torque gain your remap delivered – in numbers and curves.
All-wheel drive is fully supported
The Dynomax 4000BR 4x4 features mechanically synchronized axles that handle front-drive, rear-drive, and all-wheel-drive vehicles with equal precision – no compromises, no drivetrain restrictions.
Live tuning on the dyno extracts maximum performance
Real-time parameter monitoring allows ECU calibration under actual load conditions. Each iteration cycle – new measurement, comparison, adjustment – continues until the software delivers its full potential safely.

How we work
Vehicle is positioned on the rolling road
We secure the car on the chassis dynamometer, check tire pressure, and attach restraints. Engine bay and intake ventilation fans are positioned for accurate thermal conditions.
Comprehensive pre-test diagnostics
Before the first pull, we scan for fault codes, verify sensor readings, and confirm the engine is ready for full-load operation. Any limiting factors are addressed upfront.
Baseline measurement – your starting point
A full-load pull on the dyno captures baseline horsepower and torque curves. This is your reference point against which all improvements are measured.
Data analysis
We analyze power and torque curves, boost pressure, air-fuel ratio, ignition timing, and other ECU parameters – identifying optimization potential and any anomalies.
Software adjustment (if requested)
For clients seeking live tuning, we modify ECU calibration maps in real time based on dyno data. Each parameter is tailored individually to your specific engine and hardware setup.
Validation run
After adjustments, we repeat the measurement under identical conditions – comparing results and confirming the gains are stable, consistent, and safe across the entire RPM range.
Full report with graphs
You receive a complete report – power and torque graphs, before/after overlay comparison, ECU parameter logs, and a measurement certificate with official results.
What you get
Actual wheel horsepower and torque measured and documented with precise figures
ECU software calibrated individually for your engine on the rolling road
Detailed power and torque graphs with full curve analysis
Before/after comparison under identical test conditions
Official measurement certificate with verified results
Potential issues identified and flagged if detected during testing
Our equipment
Dynomax 4000BR 4x4
Professional chassis dynamometer with mechanically synchronized axles – handles front-wheel, rear-wheel, and all-wheel drive. Measures power and torque in real time with high accuracy and repeatability.
7 kW Cooling Fan
High-capacity cooling system simulates airflow at road speed – maintains correct engine and intercooler temperatures throughout the test for accurate, repeatable results.
ECU Data Logger
Real-time OBD and ECU parameter logging – records boost pressure, fuel delivery, ignition timing, lambda values, and other critical engine metrics during each pull.
Wideband Lambda Sensor
Precision wideband oxygen sensor measures exhaust gas composition – monitors the air-fuel ratio to ensure optimal power output while maintaining safe operating margins.
Dyno Analysis Software
Specialized software generates power and torque curves, enables before/after overlay comparison, and exports professional reports with full measurement data.

Sound familiar?
You had your ECU remapped and want to verify the actual power gain with real numbers
Your car feels sluggish or no longer pulls as strongly as it used to
You purchased a used vehicle and want to confirm the engine is performing to spec
You want to compare real-world output between turbocharged and naturally aspirated setups
You are building a performance project and need a precise baseline measurement
You plan to sell your car and want to document engine condition with a certified dyno report

FAQ
A chassis dynamometer is the only objective method to determine your engine's actual wheel horsepower – not the manufacturer's theoretical figure. The test reveals whether your engine delivers its rated output, where losses occur, and how efficiently the powertrain performs. For anyone who has done chip tuning, a before/after dyno comparison is the definitive proof of results.
Yes. Our Dynomax 4000BR 4x4 is a full all-wheel-drive dynamometer with mechanically synchronized axles. We test front-drive, rear-drive, and AWD vehicles without any restrictions or drivetrain limitations.
A standard package includes 3 full-load pulls. During live ECU tuning sessions, the number of pulls is unlimited – we run as many iterations as needed for the optimal result. For before/after comparisons, each measurement is performed under identical conditions.
Yes, provided the vehicle is in proper mechanical condition. We perform a full diagnostic check before testing and verify the engine is ready for sustained load. The dyno is equipped with safety systems, and we start progressively while monitoring all parameters in real time.
Yes – live dyno tuning is one of our core specializations. We adjust ECU calibration maps under real load conditions and immediately verify the result with a new measurement. Every step is data-driven and validated on the spot.
Dynomax 4000BR 4x4 – a professional rolling road chassis dynamometer with mechanically synchronized axles. It measures power and torque in real time, supports all drivetrain configurations, and delivers high accuracy with excellent repeatability.
Yes. After the session, you receive a complete report with power and torque graphs, ECU parameter logs, and a measurement certificate. If a before/after comparison was performed, both curves are overlaid with the percentage improvement clearly shown.
Find Out Your Real Power – and Maximize It
Dyno testing on a Dynomax 4WD chassis dynamometer in Riga, Latvia – real-time data logging, custom ECU calibration, before/after graphs, certificate, all drivetrain types
+371 22 11 11 16