
DPF Diagnostics, Repair & Delete in Riga
Professional diesel particulate filter diagnostics, cleaning and ECU recalibration. CSDD-grade emission testing equipment – guaranteed inspection pass.
Price: from €130 incl. VAT
Check availability for your vehicle
Enter plate number or select your car manually

Why you need DPF service
Power Loss Emergency
Clogged DPF creates dangerous back pressure in the exhaust system, forcing ECU into limp mode. Engine power drops by 30-40%, RPM gets limited, and Check Engine illuminates.
Fuel Economy Impact
Forced DPF regeneration cycles burn extra diesel at 600-700°C to clear soot buildup. More clogged filters trigger more frequent cycles, increasing fuel consumption by 10-30%.
Oil Dilution Risk
Post-injection during regeneration causes unburnt diesel to wash down cylinder walls into engine oil. This critical oil dilution leads to bearing failure and potential engine seizure.
Fire Safety Hazard
DPF regeneration at 600-700°C creates extreme heat near vehicle undercarriage. Critically clogged filters can reach even higher temperatures, risking vehicle fire especially over dry vegetation.
Emissions Paradox
A blocked DPF actually pollutes more than a clean system. Incomplete combustion and PM2.5 particle breakthrough result in higher real-world emissions than factory specifications.
CSDD Test Failure
Euro 5/6 diesel vehicles must pass PN-test limit of 1,000,000 particles/cm³. Faulty DPF guarantees inspection failure at CSDD, with conditions worsening every kilometer driven.

DPF service process
Advanced Diagnostics
Launch X431 scans for error codes and measures DPF differential pressure. Capelec CAP3070 analyzer provides precise particulate matter readings to establish baseline.
Filter Inspection
Professional endoscope examination reveals internal DPF structure condition, soot loading level, and potential ceramic damage. This determines optimal restoration strategy.
Professional Cleaning
King CAR DPF Washing Machine performs hydrodynamic cleaning for salvageable filters. Includes pressure sensor verification and temperature probe calibration.
ECU Reprogramming
When restoration isn't viable, KESS3 Master performs precise ECU modifications. Removes DPF logic, post-injection routines, and associated fault triggers.
Emissions Verification
Post-service emissions measurement using Capelec CAP3070 confirms compliance with CSDD standards. Includes comprehensive road test validation.
What you get
Engine power restored to factory specifications
Fuel consumption reduced by up to 30%
Oil dilution protection through eliminated post-injection
DPF-related error codes and limp mode eliminated
Verified emissions compliance for CSDD inspection
Extended engine lifespan through optimized back pressure!
Our equipment
Launch X431
Professional diagnostic system for real-time DPF pressure monitoring, sensor data analysis, and forced regeneration control on all European vehicle brands.
Capelec CAP3070
CSDD-grade particulate matter analyzer for precise emissions measurement. Essential for verifying compliance with Euro 5/6 standards.
King CAR DPF Washer
Professional cleaning system using specialized chemical solutions and hydrodynamic pressure. Restores filter efficiency without damaging ceramic structure.
KESS3 Master
Advanced ECU programming tool for BMW, Mercedes, Audi, and VW. Enables precise modification of DPF parameters while preserving engine protection functions.
WinOLS Software
Professional calibration software for precise ECU map modification. Ensures complete DPF logic removal without affecting critical engine management systems.

Sound familiar?
DPF warning light on with reduced engine power
Fuel consumption increased 10-30% above normal
Black/grey exhaust smoke with diesel smell
Engine oil level rising between changes
Vehicle mileage approaching 150,000-200,000 km
Failed emissions test at CSDD inspection

FAQ
Software work on the DPF system at JVK PRO in Riga costs from €130 including VAT. The exact price depends on the make, engine and scope of work – we confirm it before starting, by plate number or after diagnostics. Pay-later with KLIX is available.
A software DPF delete at JVK PRO starts from €130 incl. VAT; DPF together with EGR also from €130. We run diagnostics and a particle test first: in many cases cleaning (from €80) or restoration with a 3-year warranty is the better option. A vehicle with the DPF disabled is not intended for public roads and may fail the CSDD inspection.
Complete service typically takes 4-6 hours, including diagnostics, cleaning, and verification. Complex cases requiring ECU programming may take up to 8 hours for full optimization.
Yes. We verify emissions compliance using the same grade equipment as CSDD testing centers. All solutions meet Euro 5/6 particulate matter limits of 1,000,000 particles/cm³.
Restoration success depends on ceramic substrate condition. Our diagnostic process determines if professional cleaning can restore efficiency or if ECU optimization is necessary.
Continued operation with a clogged DPF leads to severe engine damage through oil dilution and excessive back pressure. Repair costs can exceed €5000 for major engine damage.
Professional inspection is recommended every 60,000-80,000 km or when warning signs appear. Regular maintenance prevents expensive repairs and ensures optimal performance.
Proper DPF function typically reduces fuel consumption by 10-30% by eliminating excessive regeneration cycles and optimizing exhaust flow.
Yes. Whether through professional cleaning or ECU optimization, our solutions provide permanent resolution of DPF issues while maintaining emissions compliance.
We specialize in European brands including BMW, Mercedes, Audi, VW, and Volvo. Our equipment and software cover all modern diesel engines with DPF systems.
With a software DPF delete we recalibrate ECU maps so that smoke opacity and particulate matter stay within legal limits. We verify with a CSDD-grade Capelec smoke test – you see the readings before leaving the workshop.
DPF (Diesel Particulate Filter) and FAP (Filtre à Particules) are the same device – DPF is the generic term, FAP is PSA Group's branding (Peugeot, Citroën, DS). The working principle is identical, and so is the service approach – diagnostics, cleaning or software removal with ECU recalibration.
DPF Warning Light On?
Stop risking engine damage from a clogged filter. Our technicians diagnose, clean and restore DPF systems with verified emission results – same day turnaround.
+371 22 11 11 16