
Diesel Emissions Test – Smoke & Particle Measurement
Two measurement methods in one facility in Riga, Latvia: particle number counting (PN test, post-2013 vehicles) and smoke opacity measurement (k-value, pre-2013 diesels). Know your numbers before the inspection.
Price: from €20 incl. VAT
Check availability for your vehicle
Enter plate number or select your car manually

Why you need emissions test
CSDD requirements tightened in 2026
The grace period is over. Last year a marginal exceedance earned a grade of 1 with a year to fix it. In 2026 the same reading means a failed inspection. Find out where you stand before the station does.
Two test methods – one appointment
Particle number measurement with CSDD-grade CAPELEC CAP3070 for post-2013 vehicles and smoke opacity measurement with TEXA OPABOX for older diesels. No need to visit two separate locations.
See the real condition of your DPF
The test delivers exact figures – particle count or k-coefficient – not a simple pass or fail. You will know how close to the limit your filter actually is and whether it functions correctly.
Hard data instead of guesswork
CAP3070 counts particles using Extended Diffusion Charging technology. TEXA OPABOX measures optical density with a heated chamber. The result is a fact, not an opinion.
Mandatory check before inspection
The CSDD station runs the same test. Knowing your result in advance lets you address any issue before the inspection rather than being surprised at the station.
Emissions test process
Determine the test method
Based on your vehicle's first registration date we select the correct procedure: particle number (PN) test for Euro 5/6 cars registered from 2013, or smoke opacity (k-value) for older diesels.
Connect the equipment
We insert the probe into the exhaust pipe. For the PN test we use the CAPELEC CAP3070 – the same counter used at CSDD stations. For opacity we connect the TEXA OPABOX Autopower.
Measurement in 30 seconds
The CAP3070 counts solid particles per cubic centimetre. The TEXA OPABOX measures optical density during an acceleration cycle. The entire procedure takes less than one minute.
Analyse the results
We compare readings against Latvian limits: up to 1,000,000 particles (with a 25 percent tolerance – up to 1,250,000) or k-value up to 1.5 or 3.0 depending on the registration year.
Report and recommendations
You receive a detailed report with exact figures. If your readings exceed the limit we explain the root cause and recommend a specific solution: forced regeneration, DPF cleaning, or component repair.
What you get
Exact soot readings
clear numbers rather than assumptions
Genuine insight into DPF condition before the CSDD inspection
Detection of hidden problems: removed filter, poor remap, faulty EGR
Actionable recommendations to lower emissions and pass the test
Confidence that your vehicle will clear the Latvian inspection in 2026
Our equipment
CAPELEC CAP3070
Particle number counter using Extended Diffusion Charging technology. This is the same unit used at CSDD inspection stations – your pre-test result is directly comparable to the official measurement.
TEXA OPABOX Autopower
Opacimeter for diesel smoke opacity measurement. The optical method with a heated sensing chamber delivers stable readings regardless of ambient temperature.
OBD/EOBD diagnostics
We read ECU fault codes related to the exhaust system – DPF status, EGR valve, lambda probes, and exhaust temperature sensors – to correlate with the physical measurement.
ETS Software
TEXA measurement management software – step-by-step test procedure, automatic protocol generation, and direct comparison of results against legal limits.

Sound familiar?
You had the DPF removed – the inspection can detect this through elevated particle counts
The soot filter is clogged or damaged – high smoke readings and a likely test failure ahead
Check Engine light related to DPF or exhaust system – the cause needs to be identified before CSDD
You are buying a used diesel – a DPF check protects you from hidden problems and unplanned costs
Preparing for the annual inspection – better to know the result in advance than at the station
After DPF regeneration or cleaning – verify that the filter is back within legal limits

FAQ
A diesel smoke or particle test before inspection at JVK PRO in Riga costs from €20 including VAT. The exact price depends on the make, engine and scope of work – we confirm it before starting, by plate number or after diagnostics. Pay-later with KLIX is available.
For vehicles registered from 2013 the limit is 1,000,000 particles per cubic centimetre. With the 25 percent measurement tolerance the effective threshold is 1,250,000. Older vehicles (pre-2013) are tested by opacity: k-value up to 1.5 (from July 2008) or up to 3.0 (before July 2008).
The PN test counts solid particles in the exhaust gas – it applies to Euro 5/6 vehicles from 2013 onward. The smoke opacity test measures optical density during an acceleration cycle and is used for older diesels. The method is determined by the vehicle's first registration date.
From 2026 the transitional period is over. A marginal exceedance that earned a grade 1 in 2025 now means a failed inspection. We recommend a pre-test at our facility before visiting CSDD to avoid surprises.
Without a functioning diesel particulate filter the PN test cannot be passed – emissions will be many times above the limit. Options include DPF restoration, installing a new filter, or an ECU software correction. We will assess the situation and recommend the most practical solution.
Vehicles registered before July 2008 are allowed a coefficient of up to 3.0 (with a 5 percent tolerance – 3.15). Vehicles from July 2008 to 2013 must stay below 1.5 (with tolerance – 1.575).
It depends on the cause. A clogged DPF may respond to forced regeneration or professional cleaning. Faulty injectors or a turbo issue require repair. A poor aftermarket remap can be corrected with proper software. We identify the root cause and suggest the right fix.
The CAP3070 is an identical particle counter to those used at CSDD stations, including Jelgava and Riga. Your measurement result is directly comparable to the official reading you will receive at the inspection.
Do not risk it – test your emissions first
A single measurement can save hundreds in repairs and prevent unpleasant surprises at the annual inspection. Get tested now so your vehicle stays on the road.
+371 22 11 11 16