Airbag Module Reset & SRS Crash Data Removal

Professional SRS module repair in Riga, Latvia – restore your airbag system without replacing the unit

Price: from €100 incl. VAT

Check availability for your vehicle

Enter plate number or select your car manually

LV
or select manually ▼
Searching...
Vehicle not found in databaseSelect manually from the list above
Installment payment available via KLIX
Get a quote
We'll calculate the exact price for your vehicle
optional
Sending...
KLIX Pay in installments, no overpayment
✓
Thank you!
We'll call back with the price for your vehicle
Mon–Fri   9:30 – 17:00 | Sat: 10:00 – 15:00 (by appointment)

Why you need Airbag reset

01

Your module works – it is only software-locked

In 90% of post-accident cases the SRS module is physically undamaged. It simply logged the crash event and entered lockout mode. No replacement needed – a software reset restores full functionality.

02

A new module is an unnecessary expense

An OEM airbag module from the dealer can cost anywhere from 300 to 1,500 euros, plus coding and adaptation. Our reset procedure delivers the same result at a fraction of the price.

03

Completed in just a few hours

Reading the EEPROM dump, clearing Crash Data, and writing the restored file takes 2 to 4 hours. Drop your car off in the morning and drive away with a fully operational SRS system.

04

All vehicle makes supported

BMW, Mercedes, Audi, VW, Toyota, Volvo, Ford, Opel, and more – we carry programmers and software for SRS modules from every major manufacturer.

05

Work backed by our guarantee

Every restored SRS module undergoes a complete diagnostic check. We guarantee correct airbag system operation and a clean dashboard – no warning lights.

Airbag repair process

01

SRS system diagnostic scan

We connect the Launch X431 to your vehicle and read every fault code stored in the airbag module. If an SRS error or airbag light is on, this tells us the lock type: Crash Data record, stored DTCs, or hardware damage.

02

EEPROM dump readout

We remove the EEPROM chip from the SRS module and read the full memory dump with a dedicated programmer – a complete snapshot of all data inside the unit.

03

Crash Data removal

Using specialised SRS software, we locate and erase the accident records (Crash Data). Factory-default values are restored for all deployment flags and event counters.

04

Restored dump write-back

The cleaned dump is written back to the EEPROM chip, and the module is reinstalled in the vehicle. The unit returns to its pre-accident state.

05

Final system verification

A second diagnostic scan with the Launch X431 confirms every fault code is cleared, the airbag warning light is off, and the entire SRS system is fully operational.

What you get

SRS module restored to factory-default condition

Airbag warning light on the dashboard turned off

All airbags confirmed active and ready to deploy

Full SRS diagnostic passed with zero fault codes

Savings of 300 to 1,200 euros compared to module replacement

Our equipment

Launch X431

Multi-brand diagnostic scanner for comprehensive SRS system diagnostics, airbag fault code reading, and error clearing

EEPROM Programmers

Professional-grade programmers for reading and writing memory dumps from SRS module EEPROM chips

Specialised SRS Software

Dedicated software suite for dump analysis, Crash Data identification, and safe removal from airbag control modules

Soldering Equipment

Precision soldering station and tools for safely removing and reinstalling EEPROM chips on SRS module circuit boards

Sound familiar?

Airbag warning light stays on after a collision

Airbags deployed and the SRS module is now locked

You purchased a vehicle with an active airbag fault

Warning light remains on after airbag replacement

Your insurer requires a fully functional SRS system

Vehicle fails roadworthiness inspection due to an airbag fault

FAQ

Airbag module reset at JVK PRO in Riga costs from €100 including VAT. The exact price depends on the make, engine and scope of work – we confirm it before starting, by plate number or after diagnostics. Pay-later with KLIX is available.

In 90% of cases the SRS module is physically intact after a crash. It has simply recorded Crash Data and locked itself. We erase the accident data and return the module to factory condition – replacement is not necessary.

Completely safe. We restore the module to its original factory parameters, so it functions exactly as it did before the accident. All airbags remain fully operational and ready to deploy.

Crash Data is the record stored in the SRS module memory after a collision: impact moment, which airbags fired, sensor readings. These records lock the module. Removing Crash Data resets those entries to factory defaults.

We service all major brands: BMW, Mercedes-Benz, Audi, Volkswagen, Toyota, Volvo, Ford, Opel, Skoda, Peugeot, Renault, Kia, Hyundai, and many others.

A standard SRS module reset takes 2 to 4 hours. In complex cases – such as a damaged EEPROM chip or a rare module type – it may take up to one business day.

Yes. After the reset the SRS module returns to full working order. In a future collision the airbags will deploy correctly, exactly as the manufacturer intended.

If the airbags deployed (inflated), they must be replaced with new units. If the airbags did not deploy and only the SRS module locked up, airbag replacement is not needed – restoring the module is sufficient.

Been in an accident? We will restore your airbag module

Skip the cost of a brand-new SRS unit. Our software reset takes just a few hours – with a guaranteed result.

+371 22 11 11 16
Piedrujas iela 28, Rīga
Mon-Fri: 9:30 – 17:00

Book Airbag

Stated figures are approximate. Results depend on vehicle condition and driving circumstances.