
SEPTEMBER RESULTS 2026
+2,313 hp and +4,375 Nm total · record +97 hp · 46 Stage 1 jobs this month
JVK PRO COURSE – A LITTLE LATER
We are slightly postponing the start of the JVK PRO course. Thank you for your interest – we have received many questions and are keeping track of everyone. Leave your contact details in the form at the bottom of the page and we will let you know personally as soon as the start date is set. Meanwhile – let's keep going!
DPF RESTORATION AND REFURBISHMENT
In September we launched a new service – the full diesel particulate filter restoration cycle. In-depth diagnostics of the filter and every related system, the decision made together with the customer, and when cleaning is not enough – full refurbishment with a new filter element inside the original housing. More on the service page.
In-depth diagnostics
We check not only the filter but also the injectors, EGR, turbo and sensors – everything that affects how it works.
Cleaning or refurbishment
If cleaning is enough, we clean it. If not, we replace the filter element and keep the factory housing and mounts.
3-year warranty
On the work performed and on passing the particle test at the CSDD inspection.
A fraction of a new one
A new DPF costs €1,500–4,000 – restoration costs only a part of that.
WHO CAME TO US
Flagships and big diesels
September opened with a BMW 750i G11 and its 450 hp V8 – the most powerful car of the month: 541 hp and +130 Nm after Stage 1. Alongside it a Jeep Grand Cherokee 3.0 CRD that gained 92 hp and 170 Nm, an Audi A6 Avant Bi-Turbo and a pair of BMW 40d – an X5 and an X6. Big engines where the factory leaves a serious torque reserve.




Commercial vehicles – back on the road
Vans keep coming in: a Renault Trafic 2.0 dCi gained 63%, a Citroën Jumper 2.0 BlueHDi 55%, a Renault Master 2.3 dCi 46% and a Nissan NV400 35%. For work this means pulling power under load, confident motorway merging and lower consumption.




9 cars on the dyno
In September 9 cars were measured on the load dyno – before and after. Real power and torque curves, not calculated numbers from a database. More about the dyno →
Dyno measurementsFile service: 49 workshops
49 workshops worked with us through the file service in September – the partner network keeps growing. Top makes: BMW, Audi, VW, Mercedes. More about the file service →
File serviceNOT ONLY STAGE 1
Stage 1 is only part of September. The main flow through the workshop is diagnostics and pre-inspection measurements: cars that do not drive right, throw faults or smoke. Here is what else kept us busy.
Top services in September
Diagnostics
Cars with fault codes, lost power, limp mode and intermittent Check Engine lights. We find the cause instead of clearing codes.
DiagnosticsSmoke tests
Inspection season: particle and opacity measurement on Capelec / TEXA – owners know the result before visiting CSDD.
Smoke testRemap rework
We fix other people's remaps: cars that drive worse after «tuning» elsewhere than they did from the factory.
OriginalDPF and intake cleaning
Hydrodynamic cleaning of particulate filters and ultrasonic cleaning of intake manifolds.
CleaningECUs and Airbag
ECU replacement and cloning, Airbag module restoration after accidents.
CodingCases from the workshop
Ford Grand C-Max 2011
The owner tried to run a forced regeneration himself – it stopped at 25% and the ECU reported the filter was not reaching the required temperature. The fault returned within a day or two, so we dug into why the regeneration never completes.
Mercedes GL 420 2006
After the turbos were replaced, the car went into limp mode under hard throttle. Another workshop blamed a «software error» – we looked at real boost parameters on the road.
Hyundai Tucson 2019
Every 400–500 km Check Engine came on with code P2BA8 for the NOx system, while power was fine and the oil level was not rising. Intermittent faults like this need live data, not just clearing the code.
Toyota Avensis 2016
Check Engine and a parking brake fault every two days, suspected DPF not regenerating. When the intake manifold came off, we found loose bolts – a small thing that directly affects how the engine runs.
Alfa Romeo 159 2007
The car smoked so much that the inspection did not even measure opacity – failed on visual assessment. Our measurement shows the real picture before the repeat visit to CSDD.
VW Touareg 2016
DPF fault on, regeneration not completing. Before deciding between cleaning and restoring the filter, we measured particles to understand its real condition.
RECORDS OF THE MONTH
BMW 525d
Ford Galaxy
STAGE 1 – TOP BRANDS
In September BMW led again – 12 cars out of 46, followed by Audi with 10. The German trio (BMW + Audi + Mercedes) accounts for 57% of all Stage 1 jobs. The remaining 12 cars come from 8 more makes: Volvo, Citroën, Peugeot, Nissan, Mini, Jeep, Ford, Opel. 13 makes in total, 43 diesels and 3 petrol cars.
MOST POWERFUL
Power is not the only metric. On modern turbo engines the factory caps torque to protect the gearbox, and Stage 1 first of all lifts exactly that limit. The Audi A6 Avant Bi-Turbo gained 150 Nm, the BMW 750i 130 Nm, and the torque record of the month went to an Audi A6 3.0 TDI 204 hp: from 400 to 600 Nm (+50%). It is torque you feel under acceleration, not peak horsepower.
BMW 750i xDrive
Audi A6 Avant
BMW X5 xDrive40d
BMW X6 xDrive40d
Mercedes ML 350 CDI
Audi Q7
Check the price and options for your car
BEST GAINS
Ford Galaxy
Renault Trafic
Mini One D
Citroën Jumper
Jeep Grand Cherokee
BMW 525d
BOOK A DIAGNOSTIC
Free diagnostic before chip tuning. We will check the engine's condition, determine its potential and select the optimal solution for your car.
+371 22 11 11 16 [email protected] Piedrujas iela 28, Riga